Retaining Wall Installation in Herriman, UT
We plan the drainage, prep the base, and build the right wall type for your slope and soil — whether that's precast block, boulder and rock, or segmental concrete block. Engineered for Utah's freeze-thaw cycles and clay-heavy soil, built to hold for decades.
We design and install retaining walls. We do not sell block or wall materials.
What Retaining Wall Installation Involves
A retaining wall is only as good as what's underneath it. Proper installation starts below grade — with excavation below frost depth, a compacted stone base, and engineered drainage — so the wall you see above ground stays plumb, level, and crack-free for decades. We assess your slope, soil type, and load requirements first, then choose the wall type that fits your property: heavy precast block for tall walls and heavy loads, natural boulder and rock for a rugged look with excellent drainage, or interlocking segmental block for clean, modular designs that handle curves and tiers. Whatever we build, the process is the same: solid groundwork, level courses, and drainage engineered in from day one.
We work with homeowners, builders, and HOAs across Herriman who need walls that actually hold up against hillside pressure and Utah weather — not walls that lean within a few seasons. Every installation is planned around your specific site conditions and built to current code.

Choosing the Right Retaining Wall Type
We install three main wall types. The right one depends on your slope, soil, load, and the look you want.
Precast Block Retaining Walls
Heavy-duty precast concrete blocks for maximum strength and a clean, uniform finish. Ideal for tall walls and heavy loads.
Learn MoreBoulder & Rock Retaining Walls
Natural stone boulders fitted together for a rugged, natural look with excellent drainage and durability on sloped lots.
Learn MoreSegmental Concrete Block Walls
Interlocking segmental blocks for modular, flexible designs that handle curves, corners, and tiered layouts cleanly.
Learn MoreOur Retaining Wall Installation Process
Five steps that turn a raw slope into a wall built to last.
Site Assessment and Wall-Type Selection
We measure slope, soil, drainage paths, and load requirements, then recommend the right wall type and design for your property.
Excavation and Base Preparation
We cut into the slope, excavate below frost depth, and compact a crushed-stone footing — the foundation every wall depends on.
Wall Construction and Structural Alignment
Blocks, boulders, or segmental units are laid level course by course, with reinforcement and geogrid where the design calls for it.
Drainage System and Backfill
Gravel backfill, filter fabric, and drain tile or weep holes route water away so hydrostatic pressure never builds behind the wall.
Final Inspection and Finishing
We cap the wall, grade the surrounding soil, clean the site, and walk you through the finished build.
Get a Free Installation Estimate
Tell us about your slope and what you need the wall to do. We'll assess your site, recommend the right wall type, and give you an honest, no-pressure quote. Or call us directly at (801) 383-0147.

Get Your Free Estimate
No pressure. Same-day callback available.
FAQs About Retaining Wall Installation in Herriman
What types of retaining walls do you install in Herriman?+
We install several retaining wall types, including precast concrete block walls, boulder and rock walls, and segmental concrete block walls. The right choice depends on your slope, soil, the height of the wall, how much load it carries, and the look you want. We help you compare options during the site visit so you get a wall that performs and fits your property.
Do tall retaining walls require engineering in Herriman?+
Walls over four feet in exposed height typically require engineered plans and a permit in Herriman and across Salt Lake County. We coordinate with licensed engineers to produce stamped drawings and handle the permitting process for you so the wall is fully code-compliant and documented.
How deep does the base need to be?+
Base depth depends on wall height, soil type, and frost line. In Utah we excavate below frost depth and compact a crushed-stone base so the wall never heaves or settles unevenly — regardless of which wall type you choose.
Do you sell block or wall materials?+
No. We design and install retaining walls — we do not sell block or wall materials. We source the right materials for your project and handle the complete installation, but we are not a material supplier.
How long does a retaining wall installation take?+
Most residential walls take two to five days from excavation to final backfill, depending on size, access, wall type, and whether reinforcement like geogrid is required. We give you a clear timeline before we start and stick to it.
Ready to Build a Wall That Lasts?
Get a free retaining wall installation estimate from our Herriman crew.
Already know your wall type? Explore our precast block retaining walls, boulder and rock walls, or segmental concrete block walls. Have a wall that's failing? See our repair and replacement services, or head back to our homepage to explore everything we offer.
